All About Remove Texture from Walls | What Are Textured Walls | Common Methods To Remove A Textured Wall

All About Remove Texture from Walls

How to Remove Texture from Walls?

How to Remove Texture from Walls?

Texturing is an old-fashioned of adding interest to a wall. One o the longest-standing ways of covering up imperfection or adding some extra character to walls is to add a textured finish.

A method these days, textured walls can steel often be seen in older buildings or in homes where renovation is being carried out. Some people love how orange peel ripples or knocks-down swirls and ridges look, and many more find texturing old-fashioned and unattractive.

Many homeowners are keen to learn how to remove texture from walls. With the methods we suggest here, you’ll be able to restore your walls to a beautiful, flat surface once more texture walls.

The texture of a wall is messy and challenging, but it has to be done; if you went the walls to be smooth and simple upon starting such a project, make sure you’re well-documented.

First of all, you need to prep the area. And it’s going to be a very messy job, so either get everything out of the room or cover everything as best you can. They include a floor scraper, safety goggles, a spray bottle filled with water, sandpaper, a wallboard knife, and a joint compound.

First, spray a sot and wait for the water to soak in and then scrape at an angle, scrape the entire wall with a damp cloth, and remove any dust and debris. And it’s ensuring completely clean before getting to the next step.

If the textured wall has been painted, its surface must be skimmed using a drywall compound paint that acts as a sealant, preventing water from gettings through the wall below.

Texturing walls is a time-honored method of adding character to a wall or covering such imperfections as drywall typing inconsistencies – but not everyone loves the ridges and swirls of knockdown or the soft ripples of orange peel.

The second option is to cover the texture with a joint compound, which requires several layers. The second method takes longer to do, as you may need many layers of joint compounds, and you’ll need to let it dry overnight between layers. There are three main ways: soak and scrape it off, cover it up with compound or paneling, or remove the drywall entirely.

What Are Textured Walls?

What Are Textured Walls?

Texture interior walls have a practical function since the texture hides the signs of drywall installation – that is, the taped seam where the sheets of the drywall meet-and other imperfections.

The textured walls in the rental or commercial buildings. And some people steel feel texture adds character; the bumps reflect light and create shadows, making ordinary walls less “boring.”

One o the best approaches to add texture to a wall is with sanded paint available at many local home improvements and hardware retailers. And the special paints are already formulated with sand, enabling you to add a rough texture to the wall.

Ramsay believes other textured wall techniques can elevate a design scheme. The environmentally friendly option creates a chalky effect that gains visual appeal over time. It is created from powdered limestone that has been altered with heat and water.

One popular technique is skip trowel, where the trowel is “skipped” across the plaster on the wall or moved in a fashion that results in random strokes on the surface.

It can become quite messy rather quickly, so a drop cloth is essential for making clean-up a breeze. A professional to handle the smoothing process using troweled plaster or spackling paste. Some incredibly textured wallpapers are now produced by Phillip Jeffries, which is gorgeous.

There is one important factor to contemplate, though. Much like upholstered furniture, fabric walls can collect dust, requiring vacuuming from time to time. With a plaster treatment, your home should reflect your aesthetic -a tasteful space that’s a joy to live in.

Also Read: All About Bathroom Wall Paneling Ideas | Bathroom Wall Panel Ideas | Top Bathroom Wall Paneling Ideas

How Is Wall Texturing Done?

How Is Wall Texturing Done?

The textured wall tells you four different ways to texture a wall. If you want an orange peel or ridged texture on your wall or ceiling, you can achieve any pattern or texture with these simple steps.

  • How to texture a wall with joints compound
  • How to texture a wall with texture sprayers
  • How to texture a wall with a sponges
  • How to texture a wall with a rollers

1. How to Texture a Wall with Joints Compound?

How to Texture a Wall with Joints Compound

  • The first step is to clean the walls and let them completely dry.
  • Per the instructions, the joint compound with the water has a thick batter consistency.
  • Use a white putty knife and a trowel to spread it on the textured wall.
  • You can use the tools accordingly to create the desired texture.

For example, if you can want a cross-hatched texture, use a notched trowel and draw lines in the joints compound of a textured wall.

2. How to Texture Walls with a Texture Sprayer?

How to texture walls with a texture sprayer?

  • The first step is always cleaning the surface of the walls you’re texturing your wall or ceiling, cleaning, and then leaving them to dry.
  • The furniture covers all floors as you don’t want to ruin them.
  • The joint compound with water, then add it to the sprayer’s hopper.
  • After adjusting the nozzle, use slow motions to spray onto the wall.

3. How to Texture a Wall with a Sponge?

How to texture a wall with a sponge?

With a simple paint sponge, you can create a beautiful faux texture.

  • If you want two texture wall effects, paint the wall in a base color and let it dry completely.
  • Soak your sponge in paints of different contrasting colors or the same color for a more striking and elegant look.
  • This step creates a random texture pattern until the entire wall is filled with the design.

4. How to Texture a Wall with a Roller?

How to texture a wall with a roller?

Texture wall is a very simple technique and quite popular among people, and you can use this technique to create both kinds of textured paint or faux finish.

  • In the first two steps, clean the walls and mix the joint compound with water.
  • After that, pour this mixture into a paint tray, soak the roller, and roll it over on the walls.
  • The joint compound will Settel on the wall, again rolling over.
  • A wonderful 3D texture will occur on the walls, and this looks beautiful.
  • And use a brush for the corners, then let it dry for 24-48 hours.

This can be done with a soft brush, rag, sponge, or other tools. These texture patterns even have a name. For example, Santa Fe, orange peel, knockdown, swirls, or cat’s paw. Texture paint using a brush or roller, and the popcorn on by including it in the paint or spraying it on later.

Common Methods to Remove a Textured Wall

Common Methods To Remove A Textured Wall

The common methods we use to remove a textured wall are many tips and tricks. And we also included some step-by-step instructions for you to follow on some of the harder methods.

A Skim Coat
A Skim Coat

The fasteners and taped seams are covered with a joint compound or “mud” and then sanded down. The skim coat wills in all the gaps between texturing, which creates a smooth surface.

It’s similar to old-fashioned plastering or the cement coat on a foundation. Skim-coating an entire room can be messy and time-consuming. The compound is smooth and even enough.

The new wall is smooth and dry, and it can be sealed with a primer and then painted or finished as needed.

Step by Step

Here are the step-by-step instructions on how are remove texture from a wall with a skim coat.

  1. Remove The Trim
  2. Cover The Floor
  3. Sand The Surface
  4. Wipe The Wall Clean
  5. Mix The compound
  6. Apply The Compound
  7. Let The compound Dry. Sand. Apply Second Coat
  8. Final Sanding
  9. Final inspection


  • The surface is now 100 percent drywall compounds, meaning the edges of a sanding pad can gouge and leave marks.
  • Use a sanding pad;
  • making it as wide as possible helps maintain a smooth and consistent finish.
  • The drywall compound is very soft and doesn’t need much pressure. And generally, just grazing the surface is enough.
  •  The surface is the same as the old texture, and if you pack on too much compound, the wall will be thicker, so you’ll have to adjust the windows and door jambs.
  • Be careful around the edges of a wall. If you sand close to an adjacent wall, it’s very easy to scratch or even gauge it with a sanding pad.
  • The final skim coat is delicate work.
  • Sanding and an entire wall of compound and texture can create a lot of dust.
  • Sometimes you can find small imperfections and unevenness with your hand that you can’t see until the wall is painted.

1. Remove the Trim:

Remove the trim

If the walls or trim’s been painted, cut the edge with a utility knife before prying the trim off. This will prevent the paint from peeling. The putty knife with a hammer helps wedge it between the trim and walls.

2. Cover the Floor:

Cover the floor

Cover the floor with canvas drop cloths. I don’t recommend using plastic because it can be slippery and break easily.

3. Sand the Surface:

Sand the surface

First, if there are paints, the sanding will remove the sheen. This helps the compound stick to the walls. Second, any high spots in the texture will be sanded down. The entire textured wall is about the same height.

4. Wipe the Wall Clean:

Wipe the wall clean

Once you have done sanding, wipe the wall with a damp rag, cloth, or paper towel.

5. Mix the Compound:

Mix the compound

A little bit of water at a time as you mix the compound with a paddle bit. A little goes a long way since it’s already been mixed at the factory.

6. Apply the Compound:

Apply the compound:

Some contractors roll the compounds on first with a large roller and some applications with a wide knife. Rolling it on can be very messy.
If you prefer to roll it on, you’ll have to go over it with a wide knife.

For your compound, the first time, smooth it slowly with your knife as flat as possible.

7. Let the Compound Dry. Sand. Apply a Second Coat:

Let the compound Dry,Sand, Apply a second coat

For the first one, with medium grit sandpaper, get the wall as smooth as possible and then wipe it down. The second coat should fill in any small imperfections and corrects any unevenness.

8. Final Sanding:

Final sanding

Once the final coats of plaster are applied, it’s time for final sanding. Use fine-grit sandpaper on the entire wall and get it super smooth.

9. Final Inspection:

Final inspection

Apply compounds, smooth, sand, etc., as needed until the finished product is smooth and ready for paint.

Also Read: All About Cover Concrete Walls in a Basement | How to Cover Concrete Walls in a Basement

Soak And Scrape The Texture Off

Soak And Scrape The Texture Off

Paint is generally resistant to water, making it much harder to soak. If your walls are painted, you should try to sand them down with hard-grit sandpaper first.

Step by Step

Here is a step by step instructions on how we removed the unpainted texture from a wall with a soak-and-scrape process.

  1. Remove The Trim
  2. Cover The Floor
  3. Soak The Wall
  4. Start Scraping Off The Wall Texture
  5. Let It Dry
  6. .Sanding
  7. Finish Work

1. Remove the Trim:

Remove The Trim

If the wall or a trim’s been painted, cut the edges with a utility knife before prying the trims off. This will prevent the paint from peeling. Then slip a small steel putty knife behind the trim and gently pry it off the wall.

2. Cover the Floor:

Cover The Floor

Cover the floor with canvas drop cloths. And I don’t recommend using plastic because it can be slippery and break easily.

3. Soak the Wall:

Soak The Wall

Most contractors use a water bottle sprayer with a sponge. The water tends to work best and is easier to work with on your hand. Use the sponges to catch drips and help soak the wall.

4. Start Scraping Off the Wall Texture:

Start Scraping Off The Wall Texture

Clean the wall as you move down, and remove fallen chucks and new textures. I like to use the same 10-inch drywall knife to scrape as I did to apply the compound. It can be easier to use a smaller knife.

5. Let It Dry:

Let It Dry

Once all the soaking and scraping are done, let the wall dry out as needed.

6. Sanding:


Sanding is a very important step if you want a smooth finish. Use medium-hard grit sandpaper at first and get off any remaining bits of texture use too much pressure, or you risk damaging the wall.

7. Finish Work:

Finish work

When you remove texture from walls, the final step is to finish the wall. In this case, you’ll have to apply joints compound as needed to fill any hoses, scratches, dents, imperfections, etc.


  • Always sand with very little pressure. Let the sandpaper do the work. Generally, just grazing the surface is enough.
  • Be very careful not to apply the repair compound too thick.
  • Be careful around the edges of a wall.
  • Sanding wall compounds and textures can create a lot of dust.
  • Loss of light makes it easier to find imperfections.

Replace the Textured Drywall

Replace The Textured Drywall

The texture of drywall with new drywall can be the less expensive option.

If the textures are very heavy and painted, it’s probably better to demo and replace all the drywall. Sometimes it can stick so hard that the removal takes chunks of drywall.

The overly thick compound is prone to cracking and generally isn’t a good idea in larges areas. It’s also very heavys, harder to work with, and expensive. Sometimes the best way to remove texture from walls is to remove all the drywall instead.

Also Read: All About Regrout Tile Without Removing Old Grout | Can You Regrout Over Existing Grout | How to Regrout Tile Without Removing Grout

Cover Up the Walls

Cover Up The Walls

The modern farmhouse is a very popular home design at the moment. Shiplap and wainscoting are great ways to cover up a textured wall.

If you don’t want to remove texture from walls, a viable alternative is covering them up.

There’s also lots more stone and bricks being used on interior walls. Thin stone and bricks veneer mixed with wood is a beautiful design we’re using in various homes.

Also, little things are effects like outlets and switches. You must move the switches and outlets if you pack a wall 2 inches. If you have them next to the walls, they’ll have to be adjusted too.

And this could then involve plumbing and vent work in every different job, but it can sometimes be an expensive option for the textured wall.

Frequently Asked Question(FAQ):

How to Remove Texture from Walls?

The easiest way to remove texture from walls is the soak-and-scrape method. You’ll need to spray a section of the wall with water, let the water soak in and soften the texture, then scrape the texture off using a drywall taping knife.

How to Get Rid of Textured Walls?

  1. Apply a skim coat.
  2. Replace the textured drywall with new drywall.
  3. Cover the walls with another material, such as wood.
  4. Live with it.

Cost to Remove Texture from Walls

The typical homeowner spends $1.10 to $1.30 per square foot on the cost of skim-coating drywall. This process is used to smooth textured walls. The cost of removing a popcorn ceiling is about the same at $1 to $2 per square foot, as long as there isn’t asbestos.

Can You Sand Textured Walls?

Choose a sandpaper that is 120 to 150 grit to ensure surface abrasion without damaging the drywall. If warm water removed most of the texture, a light sanding will likely smooth the wall surface. For plaster walls, it can take heavy continual sanding to remove the textured paint.

How to Remove Knockdown Texture?

To remove texture without gouging the drywall, hold the blade approximately 30-degrees to the wall, and scrape in whatever motion feels most comfortable to you, using long slow strokes. If the knife meets resistance, stop; spray that area again and wait until the texture softens sufficiently.

Are Textured Walls in Style?

Are Textured Walls Back in Style? Absolutely! While the sleek-wall look isn’t going anywhere, there’s been a resurgence of wall finishes and adornments that generate visual interest, create character, and make a home feel even homier.

How to Smooth Textured Walls?

Apply a first rough coat of joint compound. Apply a second coat of joint compound. Apply a third and final smoother coat of topping compound. Sand the wall texture to a nice even smooth finish.

Best Paint to Hide Textured Walls

Lean towards using matte paint instead of a gloss when you are painting a textured wall. The matte paint will hide the texture better, whereas the gloss will define it—especially when the light hits it.

How to Get Rid of Textured Plaster Walls?

The same technique gets rid of textured walls. A thin coat of mud is applied over the entire wall surface, allowed to dry, and then sanded smooth. Especially bumpy walls may need more than one coat. Skim coating a whole room is both messy and time-consuming.

Ideas to Cover Damaged Walls

  • Wall Panels Perth.
  • Wall coverings for bathrooms.
  • Picture collage.
  • Tapestry.
  • Drywall Mud.
  • Curtains.
  • Mirrors.
  • Fabric wall coverings Perth.

Can Textured Walls Be Smoothed?

The process of smoothing textured walls with skim coating is fairly common. It refers to spreading a layer of joint compound over the walls to fill in the bumps and valleys in the texture, effectively creating a smooth surface.

Are Textured Walls in Style 2022?

Now, texture, print, and color are all taking center stage in the trends for 2022. You don’t have to embrace them all, but take a look at the new ideas and consider incorporating them into your new home for a fresh start to 2022.

How Much Does It Cost to Remove Texture from Walls?

Retexturing walls cost $1.80 to $3.80 per square foot, including old texture removal. The cost to smooth textured walls is $1 to $3 per square foot.

Like This Post? Share It With Your Friends!

Leave a Reply

Your email address will not be published. Required fields are marked *