How Much Does Septic Tank Emptying Cost?
A tradesperson’s typical rate for professionally cleaning and emptying a sewage tank is roughly £200. This cost, however, will vary based on the size, scope, and length of time required to clean your septic tank.
When planning to have your septic tank cleaned professionally, there are numerous cost-affecting elements to consider, such as the type of septic tank you have, whether single or multi-chamber and how simple it is to obtain access.
The cost of hiring a skilled drainage engineer to empty and clean your septic tank includes waste collection, any necessary repairs, and a chemical cleaning service.
The cost of clearing your septic tank will vary based on the size of your tank and the number of people living in your home.
The amount of rubbish that has to be emptied and cleaned will determine how long it takes to accomplish the work. Many drainage tank operators, like other craftsmen, would likely charge an hourly or daily cost.
The capacity of the septic tank seems to be the primary determinant of what it really costs to clean as well as empty it. One might consider paying as low as £90 for a small tank, and up to £300 for just an extra-large tank.
The kind of tank you use can also affect the final price. Because single-chamber septic tanks are less sophisticated, they are expected to become less expensive, however multi-chamber septic tanks will be more expensive.
How Much Does It Really Cost to Empty a Septic Tank?
The chart under compares the pricing variations while hiring a good septic tank business on the side to do the draining as well as cleansing service for customers.
Kindly keep in mind that these costs are estimates that should only be used as just a reference; several cost-affecting variables might lead those prices to increase or fall appropriately.
|Tank Capacity||Number of Chambers||Recommended Frequency||Average Cost|
|4,500 Litre Tank||Single Chamber||1-2 times a year||£90-£130|
|8,500 Litre Tank||Single Chamber||1-2 times a year||£150-£200|
|12,500 Litre Tank||Multi-Chamber||1-2 times a year||£220-£250|
|17,500 Litre Tank||Multi-Chamber||1-2 times a year||£260-£300|
The operator will inspect the inside of your septic tank chamber for any cracks or damaged areas once the tank is empty and clear of any waste. To avoid your drainage system failing, you must execute any necessary repairs after the garbage has been removed.
To ensure that the tank is in good working order and drains properly, the tank operator may do a test with some water by flushing a toilet within your home.
Your drainage engineer will most likely dispose of septic tank effluent at a local waste-treatment plant, depending on your local authorities’ hazardous waste disposal requirements.
After that, the septic tank expert will use professional chemical cleaning tools to thoroughly remove any remaining scum and guarantee that your tank is safe and suitable for future usage.
These specialized goods are designed to work with septic tanks. Your experienced tradesperson will then advise you on how to maintain your septic tank system and how to monitor its condition to ensure it is safe to use on a daily basis.
Factors for Additional Costs in Septic Tank Emptying
Here, the below factors are effect by additional costs of emptying the septic tanks.
1. Factors for Additional Costs: Size
The size of your tank, as you may guess, has a direct impact on the price. It’s important to note that septic tanks don’t just collect waste from toilets and sinks; they also collect wastewater from washing machines and dishwashers.
All of the wastewater from your home will be pumped into one of these tanks, so be sure it’s big enough. A medium or large septic tank should cost between £650 to £1,200 in total, while other costs may increase the price.
2. Factors for Additional Costs: Location
The cost of installation will be affected by the location of your septic tank. Above-ground tanks are typically less expensive and are ideal for small systems. They’re also less expensive to set up.
They do, however, necessitate more frequent emptying, which can be costly over the course of a tank’s lifetime.
Alternatively, you may look at installing an underground tank. These aren’t cheap, owing to the installation charges, which include digging a large enough hole to house the tank and laying proper footings.
However, on tiny sites, you may have no choice but to purchase a below-ground tank because the surface area is limited. Before purchasing your tank, be sure to verify local legislation, since some municipalities limit the types of septic systems that may be used.
3. Factors for Additional Costs: Drainage
For below-ground tanks, drainage systems are necessary, and installing them might add to the original expenditures.
A soakaway can be installed in a huge underground tank, enabling part of the effluent to be filtered out into the surrounding ground. As a consequence, your tank will need to be filled less frequently, saving you money.
Of course, before installing a tank, you must confirm that the ground is adequate for a soakaway and can absorb part of the extra water. The cost of having this checked out and any necessary pipe and drainage work built will increase the project’s cost.
4. Factors for Additional Costs: Material
The material used to construct septic tanks has an impact on their price. The higher-quality materials are, unsurprisingly, more expensive, but if you can afford the initial expenditure, it’s worth it because the tank will last longer.
Concrete, for example, is used in some of the cheapest tanks. While this allows you to purchase a low-cost septic system, they do not survive long and must be replaced on a regular basis.
A high-density polyethylene model, on the other hand, will last much longer and will be more cost-effective in the long run.
5. Factors for Additional Costs: Labour
Finally, the cost of septic tank installation will be heavily influenced by labor. The typical cost of installing a new tank, for example, is between £1,200 and £1,800.
If you go with a larger-than-average tank, this can be a lot more. Similarly, if you’re replacing a tank, you’ll need to account for the expense of removing the old septic system.
Fortunately, this is an area where you can save money. Digging a hole is quite straightforward, and hiring a digger will be significantly less expensive than engaging a professional crew to install the tank.
You may even build the complete drainage system yourself if you have some basic plumbing skills. Alternatively, utilize a service like Quotatis to bargain with local contractors about installation costs.
The average septic tank system will set you back a little over £2,000 to buy and install. You can save money by prepping the site yourself, but for future savings, it’s better to invest in the finest tank available.
How to Reduce Septic Tank Emptying Cost?
1. Only Put the Three P’s in Your Septic Tank.
This is the most important thing to remember while using any toilets that are linked to a septic tank system.
Flush just the 3 Ps: pee, poo, and toilet paper. Anything else, such as baby wipes, sanitary goods, baby buds, and kitchen towels, will be difficult for your tank to digest since they contain indigestible polymers that septic tank bacteria cannot break down.
That indicates you’re in danger of clogging your soakaway, which means the solids in your tank will continue to pile up without any natural digestion. There’s just so much your sewage tank bacteria can eat!
So, think carefully what you flush into the tank, and you won’t have to empty your septic tank as often.
2. Select the Most Eco-Friendly Septic Tank Cleaning Products & Detergents for Your Septic System.
Chemicals can also be detrimental to the microbes in your septic tank. If you flush detergents and bleach meant to eliminate 99.99 percent of all bacteria in your toilet and laundry down your sinks and toilets on a regular basis, they can also kill germs in your septic tank.
Those bacteria are required to keep your tank from becoming clogged. It’s normal that you’ll want to sanitise your toilet and clean your drains on a frequent basis. As a result, seek for cleansers and detergents that are suitable for septic tanks.
There are some that, while effective at eradicating surface bacteria in the toilet, have no effect on the germs in your tank. At the very least, they won’t murder as many people. Wherever feasible, try to buy organic items.
Again, this all adds up to reducing the frequency with which your septic tank must be emptied. If your bacteria are in good shape, they will eat up all that organic waste, turning it to water and CO2 and preventing things from accumulating.
Given enough time, even the existing sludge at the bottom of the tank, as well as the fats, oils, and greases running on the top, will be depleted.
3. Balance Your Peak Water Usage
If you consume a lot of water in a short period of time, your septic tank balance will be put under a lot of stress.
If you’re taking a shower upstairs while someone else does the dishes below, that’s two continuous streams of water that will overflow your pipes and, as a result, your tank.
A comparable amount of water goes into the soakaway for every liter flushed into the tank. When you flush a large volume in a short period of time, the contents are physically stirred, resulting in undigested effluent streaming into the soakaway.
Does Your Septic Tank Need Emptying?
As a basic guideline, customers should only have to empty their septic tank each 3 to 5 years. Having that said, the exact period will change depending on the use as well as the number of people living in your home.
With larger homes, the tank might have to be cleaned relatively often. In a one-person household, on either side, the tank might do need to be emptied every 10 years.
Flushing out the septic tank on a regular basis is necessary for proper functioning. A malfunctioning septic tank can cause major difficulties for the home, such as sewage backing up in the drains or sewage rising up through the ground surrounding the tank outside.
There are very few of obvious signals that the home’s septic tanks also have to be drained that customers should have been on the watch for:
1. Your toilet and/or washing machine begin to run slowly and sluggishly. If your toilet is suddenly having difficulties flushing properly, you should inspect your septic tank right away.
- When waste from your home is flushed through your pipes and into your septic tank, it separates as soon as it reaches the tank.
- Everything that can be liquefied will find its way to the drainage hole. Everything that is heavy sinks to the bottom of the tank and becomes sludge.
- To avoid significant problems, you should empty your tank when the sludge level rises to the point where it threatens to block it.
- Slowed toilets and drains in your home are a clue that your tank is near to becoming full.
2. When you can see overflow around the surrounding surface outside, this is another more evident and serious warning that your tank needs to be emptied.
- If you find yourself in this awful scenario, you will be acutely aware because there will almost certainly be a strong stink.
- If you see a backup into your yard or in your home’s drains, it’s a sign that the tank is clogged, and you should contact a plumber right once to avoid major damage to your property, septic system, and financial account.
- When it comes to septic tanks, remember that prevention is vital. Set up a schedule to have your tank emptied every few years, depending on your usage and household size, rather than waiting for an issue to arise.